...and I'm currently about half way through and decided to test it. btw, it's a 335 so I want to make sure it's right before shoving everything back through the F hole. I tested the bridge side and when rolling the vol pot back to about 8.5, I have about about 5-10% of the vol left.
Did I fry the pot maybe?
Vol is 550k cts, tone is 250k push/pull, .o22 orange drop, push/pul is to split the coil parallel but I flipped the black with green and the red with white so the slug side will be activated when pulled.
Here's the scheme I'm using,
Maybe someone can tell me something while I double check everything again.