Pot and cap values for these pickups in a Tele?

[Will S-T]

Firstly these are two Tele projects and I'll be using parts that I already have,
including concentric pots for each pickup and dont really want to buy more.

Tele 1 - Neck mini HB @ 11k + bridge full size HB @ 14k, both OBL's.
Alder body, maple/ebony neck, Schaller top lode roller bridge
with custom B-pickup surround as mini tuners.

Tele 2 - Neck SM-2 mini HB @ 8k + STK-2 @ 19k, both Seymour's.
Body still to get-Ash?, Mighty Mite maple/ebony compound
raduis neck, Wilkinson bridge and Gotoh Klusons.
( this will be the better guitar )

Both guitars will have 5 way switching and series/split/parallel for each pickup,
Fender Super switch and 3 way slide switches.

N
N + B Series
N + B Parallel
N + B Series/out of phase
B

The pots that I have are 2 x 250/500's (linear) and 2 x 500/500's (CTS ?).

Given the multiple options the switching will allow,
what pots would you recommend I use for each guitar?
And with the 250/500's, what is best for tone/volume?
I have plenty of .22 + .47 orange drops but would
any other values be better? I like bright guitars!

Thanks in advance for your considerations.

Will.

[jeremy]

if you like bright i would go with the 500/500 for the alder obl tele and 250/500 for the other. using the 500k part for the volume and 250k for tone should be brighter than the other way around. i use orange drops .022 for just about all my tone circuts

[Butch Snyder]

The pots that I have are 2 x 250/500's (linear) and 2 x 500/500's (CTS ?).

Will, I second Jeremy's post; however, I would use audio taper pots instead of linear.