Does Any One Have A Wire Diagram For This? Or A Link To It? I Can't Seem To Find It. I Have E-mail Seymour Duncan A Few Times And They Never E-mail Me Back? I Want To Split Them.
Does Any One Have A Wire Diagram For This? Or A Link To It? I Can't Seem To Find It. I Have E-mail Seymour Duncan A Few Times And They Never E-mail Me Back? I Want To Split Them.



???
Just for clarification, three pups, a three way switch, 1 vol, and 1 tone? That would be pretty standard, in what way do you want to introduce splitting into the wiring scheme?
...another switch? Push/Pulls? 5-way super switch?
...amd welcome!
Hello, thanks for the post, but I didn't explian it right, I have three dpdt or dual on-off-on switches. can you tell me how to do it with those? or is it the same?
3 pickups
3 2-dpt switches
1 volume
1 tone
(no pull/pushes
that is what I have.
Thanks!!!
so I would have to get different switches? or is there a way to use the ones I have. because mine only has six post.
Thanks!!!
Jason
Thank You Very Much!!!
I Have Had This Guitar In A Box For The Last 10 Years, You Can See The [u]battle Axe[u]on My Profile It's A 84' Charvel.



Here's one way:
On each switch, (the blue square), you have a choice:
1. Connect the red jumper to ground to split to the north coil.
2. Connect the blue jumper over to the other terminal to split to the south coil.
Don't do both!
The "normal" thing to do would be do the red jumper to ground on the neck and bridge, and do the blue jumper on the middle. That will make neck/middle and middle/bridge hum-cancelling.






Series/split.
Look at his first post.
Thanks Guys!!! Like I Said I Have E-mail Seymour Duncan A Few Times And They Never E-mailed Me Back At All. You Guys Have Been A Big Help!!!
Thanks!!!
Jason
So To Have It **single Coil--off--doubble Coil ** In Each Switch For Each Pickup. Which Photo Is It?
Thanks!!
Jason



Mine, in post #11. I believe hermy thought you meant parallel.