Hey everyone, I am new to the forum and am having some techinical difficulties with my Ibanez RT650. I recently ran into a problem with the original rotary style switch which came with the guitar and have to replace it, but I also bought a couple of pickups to put into it, a Duncan SH-5 and a Dimarzio Super Distortion for a couple of different tones. Since the guitar initially also had a single coil in it, I just opted to make it a dummy pickup and leave it sitting in the pickguard unwired and go for a 3 way pickup switch. Since the guitar also has coil splitting on the tone knob, and has both a master tone and volume knobs on it, I can't seem to figure out how to wire up both the humbuckers so they can be coil tapped with the tone knob, all the schematics I have come across are for volume knob coil tapping. I called SD (all the way from Canada) and was told to use the Tele diagrams whic don't really work because the H/H with 3 way switch and push-pull pot are for the volume knob.

Any advice on how I would go about wiring up this guitar would be greatly appreciated.