Esquire wiring

[ciccios]

A little help from my friends!
I buyed a Esquire 50/54 Vintage Repro wiring circuit for my selfmade Jeff Beck Esquire and i tried to assembly with a SD Jerry Donahue Tele Lead APTL-3JD following the schematic, but it doesn't work humming.
circuit and pup are ok
Anybody can show me the right way with this kind of switch an circuit ?
thanks for suggestions...

[jeremy]

welcome to the forum!!


http://www.seymourduncan.com/support...ematic=esquire

looks like the one you want

[Funkfingers]

Looking at the photograph of the kit circuit diagram, I notice the Position 1, 2, 3 captions. Bassy preset, direct preset, adjustable tone control. These are in the wrong order compared to the Fender tradition.

The hyperlink posted above by Jeremy will show you how things ought to be connected.

NOTE: Both the kit and SD schematic diagrams assume that you are using a three-way selector switch with the contacts laid out according to USA-spec.

WIPER 1 2 3
-------------
1 2 3 WIPER

[ciccios]

Thanks you so much!
But now I have some difficulties to compare the diagram with the CLR switch cause:
new one is:
1___3___5___7
__2___4___6___8

SD is :
___O___O___O___O
O____O___O___O

Assuming i'm gonna follow SD standard esquire, what's the correct SD translation, comparing with the other one?
So:
___1___3___5___7
_2___4___6___8

or so:
___2___4___6___8
_1___3___5___7

Thx

[Funkfingers]

On a CRL-type switch, the wiper contacts should be 1 and 8.