Anybody try 6-pos rotary switching?

[Natman]

http://www.skguitar.com/SKGS/sk/Imag...way_rotary.htm

Has anybody tried wiring these rotary switches? This setup will give you every possible sound out of a 4-con humbucker. I tried wiring it with P-Rails then realized the color code is different from Duncan's.

[Xplora]

I'm trying it right now actually.

1. 100% humbucker
2. 30% humbucker
3. 30% single coil
4. 100% single coil
5. humbucker out of phase
6. Single coil out of phase

using the PRS rotary sounds on the blade switch. THAT is all the possible sounds
Just don't get the pot for the volume or tone. But I hate pots, so it's fine