The Well CIX: I don't like Agiles, actually...

[Agileguy_101]

What would your sig guitar consist of?

All I want is a frickin' guitar with frickin' lazerbeams on the frickin' headstock.

It'd look something like this, but with a lazerbeam on the headstock

Wiring scheme from the EBMM Reflex, and either their proprietary pickups, JB/59, custom shop pups wound to my specs. 25.5" scale length, 1 9/16th nut width, Graph Tech nut, Sperzel tuners, ebony fretboard, stainless steel frets, no fretboard markers but dots on the side, rosewood set neck with basswood center and mahogany sides, Gibson Explorer style headstock, Wilkinson bridge, Bourns pots. Am I forgetting anything?\

After having looked at the picture again, I'd probably move the 5 way near the pots and 2 way. I've never much liked guitars with the switch up there. It gets in the way and makes pup switching more difficult than necessary.

[80's_Metal]

What would be your sig AMP?

If you could make a dream band who would you pick?

[Bones]

Pass the well on to someone else newbie.

[Agileguy_101]

What would be your sig AMP?

If you could make a dream band who would you pick?

68 Bassman. Only modification I'd want is to make the bass channel sound exactly like the normal channel, but with more headroom. I'd use it as a clean channel and use an ABY box to switch between them.

My friends.

Pass the well on to someone else newbie.

Who wants it? Last I checked, everyone in the thread where you request to do it had already done it.

[Agileguy_101]

And with that, I pass to the torch to 80's Metal. Have fun with it man!