Twangbanger Copper Base Plate?

[STRATDELUXER97]

Guys.....the plate on my buddie's Twangbanger is not adhered to the bottom of the pickup very well...Was wondering what works best and or what you folks do,to get the plate onto the pickup solidly? I'm sure it could be a source for feedback or oscillation..Thanks..

[jeremy]

wax.

the magnets should hold it in place but wax will keep it from causing any feedback. if you dont have a wax pot you can use a soldering iron to heat the baseplate until its hot enough to melt the wax.

or silicon adhesive

[STRATDELUXER97]

wax.

the magnets should hold it in place but wax will keep it from causing any feedback. if you dont have a wax pot you can use a soldering iron to heat the baseplate until its hot enough to melt the wax.

or silicon adhesive

Thank You Jeremy.