I have a H/H/H guitar with 1 Volume, 1 Tone w/ push-pull for coil splitting and a 5-way Switch. Each humbucker has four leads. Iím looking at the two schematics below. I included the Liberator version as well but I guess the Liberator canít accommodate three, four wire pickups.
Iím not sure how to wire in the coil split for the middle pickup. If itís not possible, do I just short the red and white wires together and keep it as a full-time humbucker? I assume the green wire and shield go to the tone pot like the neck and middle pickups are shown.

http://www.seymourduncan.com/support...1t_5w_pushpull

http://www.seymourduncan.com/support..._1v1t_LBVOL_pp

Thanks.