I thought it was a bit too wankey on the bottom end, so i swapped the A5 for a normal sized ceramic. Its a bit punchier and fuller than the DD with more clarity. Easier to keep in control at high gain. Ive found my new favorite metal pup.



I thought it was a bit too wankey on the bottom end, so i swapped the A5 for a normal sized ceramic. Its a bit punchier and fuller than the DD with more clarity. Easier to keep in control at high gain. Ive found my new favorite metal pup.
Last edited by rumblebox; 03-11-2012 at 08:30 PM.
-Carlton-
71 LP deluxe goldtop - [chris white custom P90s] http://www.chriswhitepickups.com/
09 LTD H-401FM - [seymourizer/BB3] - triple shots
10 LTD MH-350NT - [PG+/PGb/BB1]
99 LTD M-100 - [customFS hybrid/496R]
Lap steel made from scraps and a GFS A2 HB
classic 50(modded), valveking 100head(modded), bad monkey, cry baby(modded), memory boy, expression factory
That sounds pretty spectacular. I am VERY fond of the TB-6 in my BC Rich USA guitar. Punchier sounds promising; I cannot imagine it sounding more full than it already does. I want to hear clips if you get any!



full shred with small ceramic = Duncan custom with hex poles?



-Carlton-
71 LP deluxe goldtop - [chris white custom P90s] http://www.chriswhitepickups.com/
09 LTD H-401FM - [seymourizer/BB3] - triple shots
10 LTD MH-350NT - [PG+/PGb/BB1]
99 LTD M-100 - [customFS hybrid/496R]
Lap steel made from scraps and a GFS A2 HB
classic 50(modded), valveking 100head(modded), bad monkey, cry baby(modded), memory boy, expression factory
Last edited by Sun King; 03-12-2012 at 08:10 AM.
LTD H-1001, 59/Custom
Jackson Soloist SLSMG, Pearly Gates/Custom 8
Peavey Triple-X 112/60
Roland Cube 60



hey bro how does it feel under the fingers? it sounds really tight and responsive? Can you post a clip of LAMB OF GOD with it?![]()
very cool!
how would you compare the FS ceramic to the FS A5 to the FS A8?
the FS8 didn't work for me and was about to put the A5 back in it. I have a spare ceramic sitting here, so I'm very curious about the finer points of what you've come across here.



What guitar do you have it in?



at one point I had hex poles in my duncan custom (oversized ceramic mag too). It was good for adding a bit of tightness and attack.
But I really don't think it sounds punchier than a DD. The custom wind to my ears anyway has a fairly broad, even EQ curve, rather than the JB/DD which definitely have a sharp upper mid thing going on, so I guess it could sound fuller, but IME, the DD dishes out copious amounts of thump, crunch and bite, in ways the Custom cannot.
My Music: Check it
Magswap tutorial: http://www.youtube.com/watch?v=jXbzqQZu-Qk
Fender MIJ '62RI strat: Rose BuffBeauty/Robusta/Robusta
Jolly Roger Cutlasscaster: CC/Little'59
Ibanez SAS32: Epi AC+ A8/AC A3
Epi G400: '59A8/'59A4
Boss NS2 & GE7, Crybaby, Fulltone OCD, Korg Pitchblack, TC Nova Repeater
Jet City 100H, Sunn 4x12(Celestion G1265s & WGS Retro 30s)
Persian Rug



Full Shred + ceramic = sex?
You really need to get out of the house more often.
"Completely Conceded Glowing Expert."



-Carlton-
71 LP deluxe goldtop - [chris white custom P90s] http://www.chriswhitepickups.com/
09 LTD H-401FM - [seymourizer/BB3] - triple shots
10 LTD MH-350NT - [PG+/PGb/BB1]
99 LTD M-100 - [customFS hybrid/496R]
Lap steel made from scraps and a GFS A2 HB
classic 50(modded), valveking 100head(modded), bad monkey, cry baby(modded), memory boy, expression factory



I made a clip. Im uploading it now.
-Carlton-
71 LP deluxe goldtop - [chris white custom P90s] http://www.chriswhitepickups.com/
09 LTD H-401FM - [seymourizer/BB3] - triple shots
10 LTD MH-350NT - [PG+/PGb/BB1]
99 LTD M-100 - [customFS hybrid/496R]
Lap steel made from scraps and a GFS A2 HB
classic 50(modded), valveking 100head(modded), bad monkey, cry baby(modded), memory boy, expression factory



I would have thought it would be a little bright and thin, maybe I'm just used to thick pickups. I think a big ceramic would be murderous in a FS, especially based on the big ceramic in a custom, so killer.



-Carlton-
71 LP deluxe goldtop - [chris white custom P90s] http://www.chriswhitepickups.com/
09 LTD H-401FM - [seymourizer/BB3] - triple shots
10 LTD MH-350NT - [PG+/PGb/BB1]
99 LTD M-100 - [customFS hybrid/496R]
Lap steel made from scraps and a GFS A2 HB
classic 50(modded), valveking 100head(modded), bad monkey, cry baby(modded), memory boy, expression factory



the video is up.
-Carlton-
71 LP deluxe goldtop - [chris white custom P90s] http://www.chriswhitepickups.com/
09 LTD H-401FM - [seymourizer/BB3] - triple shots
10 LTD MH-350NT - [PG+/PGb/BB1]
99 LTD M-100 - [customFS hybrid/496R]
Lap steel made from scraps and a GFS A2 HB
classic 50(modded), valveking 100head(modded), bad monkey, cry baby(modded), memory boy, expression factory
That is pretty much a more defined version of a Custom, isn't it? That just leaves me wondering if swapping the screws for hexes on a Distortion would add some more high end definition.
I like the sample song choice too, Ola from youtube, At the Gates, Meshuggah... nice selection.



Wow thats nice and growly! me likey!
you can call it the seymour duncan SH-666 Mr Growly! LOL!!
Wow, that sounds surprisingly good! I'll try your mod this week.
We spit on those who choose to pose, we thrash with all the rest!



Im just gonna call it the "full shred plus"
-Carlton-
71 LP deluxe goldtop - [chris white custom P90s] http://www.chriswhitepickups.com/
09 LTD H-401FM - [seymourizer/BB3] - triple shots
10 LTD MH-350NT - [PG+/PGb/BB1]
99 LTD M-100 - [customFS hybrid/496R]
Lap steel made from scraps and a GFS A2 HB
classic 50(modded), valveking 100head(modded), bad monkey, cry baby(modded), memory boy, expression factory