Results 1 to 11 of 11

Thread: Re-attach cloth tape after mag swap?

  1. #1
    Senior Member
    Join Date
    Mar 2012
    Posts
    64
    Likes (Given)
    0
    Likes (Received)
    0

    Default Re-attach cloth tape after mag swap?

    After I peel back the cloth tape on a humbucker to slide a magnet out & another back in, what do I have to do to re-attach the cloth tape around the coil? I know I'm not removing it, just kind of pushing the tape back a bit. Do I need some kind of adhesive to re-attach it?
    Gracias!

  2. #2
    Stratoblaster Tone Meister STRATDELUXER97's Avatar
    Join Date
    Mar 2004
    Location
    FLORIDA
    Age
    54
    Posts
    13,932
    Likes (Given)
    71
    Likes (Received)
    80

    Default Re: Re-attach cloth tape after mag swap?

    Quote Originally Posted by 9fingers View Post
    After I peel back the cloth tape on a humbucker to slide a magnet out & another back in, what do I have to do to re-attach the cloth tape around the coil? I know I'm not removing it, just kind of pushing the tape back a bit. Do I need some kind of adhesive to re-attach it?
    Gracias!
    I've used a glue gun and also 3M contact spray adhesive...
    Amps: 66 Fender BF Pro Reverb Combo,1973 50 Watt Marshall Head,Marshall 4x12 A/V Cab,Vox ToneLab LE,Vox VTH Valvetronix 120 Head,Vox AD 2x12 Cab,Roland Cube 20X

    Guitars: Several Stratocasters,2 Fender Telecasters,Gibson SG Standard,Tokai Love Rock Les Paul,Dean Acoustic.

    Pickups: SD SSL2,SSL5,Twangbanger,Antiquity Surfers,59N,Seth Lover N/B,Dimarzio Fred,Dimarzio VPAF N,Fender Fat 50s,Fralin SP43 Bridge,Brobucker,Antiquity Texas Hot.

  3. #3
    Imperator of Indignation idsnowdog's Avatar
    Join Date
    Mar 2004
    Location
    A shot betwixt wind and water
    Age
    42
    Posts
    15,221
    Likes (Given)
    10
    Likes (Received)
    1017

    Default Re: Re-attach cloth tape after mag swap?

    A hearty second for spray adhesive. You don't need to do a lot of the ribbon just one end to close the wrap.

  4. #4
    The Drama Dude CTN's Avatar
    Join Date
    Feb 2009
    Location
    Montréal area
    Age
    29
    Posts
    10,567
    Likes (Given)
    2281
    Likes (Received)
    2898

    Default Re: Re-attach cloth tape after mag swap?

    *shrug* I never needed to add any extra adhesive. I just peel it back slowly/carefully so it doesn't rip off all the stickiness from the tape itself.
    My Music

    Fender MIJ '62RI strat: Rose BuffBeauty/Robusta/Robusta | Jolly Roger Cutlasscaster: CustomRCA3/Little'59 | Squier Pro-Tone Strat: Stock | CTN Polaris: JB/Hot Rails(b) parallel
    CTN Exploder 880 bass
    Korg Pitchblack, Boss NS-2, Crybaby, OCD, East River Drive, Monte Allums GE-7, Nova Repeater
    H&K Tubemeister 18 | Retro30/ET65 in a Saxon custom 2x12
    Persian Rug

  5. #5
    Ultimate Kitten Puncher King IzzO)))'s Avatar
    Join Date
    Mar 2010
    Location
    p00p™
    Age
    38
    Posts
    7,179
    Likes (Given)
    1418
    Likes (Received)
    1074

    Default Re: Re-attach cloth tape after mag swap?

    Yeah, if it don't stick anymore I don't use it, coils are already taped themselves, the extra tape is mainly for looks. Stew Mac sells rolls of it if you gotta have it.

    I always tape down the wiring side, old school Duncan style, no matter what, I just use electrical tape.
    HAIL HYDRA

  6. #6
    A Ficus ehdwuld's Avatar
    Join Date
    Sep 2009
    Location
    South Alabama
    Posts
    4,400

    Default Re: Re-attach cloth tape after mag swap?

    on mine, I just pushed it to one side
    then used a very small screwdriver to flick it back in place
    EHD
    . .... -.. .-- ..- .-.. -.. --- .-.. --- --. .. ... -
    Just here surfing Guitar Pron
    RG2EX1 w/ SD hot-rodded pickups / RG4EXFM1 w/ Carvin S22j/b + FVN middle
    Candy Apple Red Squire HSS / SR500 / Martin 000CE-1
    Carvin Belair / Laney GC80A Acoustic Amp (a gift from Guitar Player Mag)
    Carvin Redline 600 2x10
    GNX3000 (yea I'm a modeler)

  7. #7
    Mojo's Minions blueman335's Avatar
    Join Date
    Jan 2006
    Location
    Florida
    Posts
    15,722
    Likes (Given)
    566
    Likes (Received)
    456

    Default Re: Re-attach cloth tape after mag swap?

    Quote Originally Posted by ConvoysToNothingness View Post
    *shrug* I never needed to add any extra adhesive. I just peel it back slowly/carefully so it doesn't rip off all the stickiness from the tape itself.
    +1. There's always been enough stickiness left on the tape, however, almost all my PU's have covers, so there's no way for the tape to come off once the cover is on.
    "Completely Conceded Glowing Expert."
    "And Blueman, I am pretty sure you've pissed off a lot of people."
    "Wait, I know! Blueman and Lew can arm wrestle, and the winner gets to decide if 250K pots sound good or not."

  8. #8
    Mojo's Minions GuitarDoc's Avatar
    Join Date
    May 2007
    Location
    Calif
    Age
    67
    Posts
    8,493
    Likes (Given)
    45
    Likes (Received)
    349

    Default Re: Re-attach cloth tape after mag swap?

    I just put it back on. There is usually plenty of stick left on for the tape to stay in place.
    Originally Posted by IanBallard
    Rule of thumb... the more pot you have, the better your tone.

  9. #9
    Stratoblaster Tone Meister STRATDELUXER97's Avatar
    Join Date
    Mar 2004
    Location
    FLORIDA
    Age
    54
    Posts
    13,932
    Likes (Given)
    71
    Likes (Received)
    80

    Default Re: Re-attach cloth tape after mag swap?

    Quote Originally Posted by GuitarDoc View Post
    I just put it back on. There is usually plenty of stick left on for the tape to stay in place.
    "Normally" I don't use glue,but the one or two times that I did,was because the tape just didn't want to cooperate! Melted wax works also.
    Amps: 66 Fender BF Pro Reverb Combo,1973 50 Watt Marshall Head,Marshall 4x12 A/V Cab,Vox ToneLab LE,Vox VTH Valvetronix 120 Head,Vox AD 2x12 Cab,Roland Cube 20X

    Guitars: Several Stratocasters,2 Fender Telecasters,Gibson SG Standard,Tokai Love Rock Les Paul,Dean Acoustic.

    Pickups: SD SSL2,SSL5,Twangbanger,Antiquity Surfers,59N,Seth Lover N/B,Dimarzio Fred,Dimarzio VPAF N,Fender Fat 50s,Fralin SP43 Bridge,Brobucker,Antiquity Texas Hot.

  10. #10
    Mojo's Minions blueman335's Avatar
    Join Date
    Jan 2006
    Location
    Florida
    Posts
    15,722
    Likes (Given)
    566
    Likes (Received)
    456

    Default Re: Re-attach cloth tape after mag swap?

    Quote Originally Posted by STRATDELUXER97 View Post
    "Normally" I don't use glue,but the one or two times that I did,was because the tape just didn't want to cooperate! Melted wax works also.
    Wax is usually why tape won't stick, so melting it is a good way to keep the tape back on.
    "Completely Conceded Glowing Expert."
    "And Blueman, I am pretty sure you've pissed off a lot of people."
    "Wait, I know! Blueman and Lew can arm wrestle, and the winner gets to decide if 250K pots sound good or not."

  11. #11
    Banned
    Join Date
    Jun 2008
    Location
    TX
    Posts
    3,160
    Likes (Given)
    0
    Likes (Received)
    396

    Default Re: Re-attach cloth tape after mag swap?

    taking a clue from what some have said about a hair dryer or heat gun, I warm up the tape a bit with a hair dryer so that the adhesive is a bit easier to release. and since some suggest to use some heat to warm up the wax a bit when done, I take the opportunity to warm up the tape again to work it back as close to original as possible. not saying it's perfect, but it's something that works a little better for me.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •