tele pickguard with 2 p90s?

[jake_xms3_punk]

does anyone know if any one makes a tele pickguard cut for 2 p90s? I can't find one anywhere other then warmoth, but I live in the uk and turnaround and shipping would take forever im guessing. would it be easier just to get one with one p90 and rout it myself?

[The Guitar]

terrapin guitars, but they are in the us.

[jake_xms3_punk]

anyone ordered a pickguard from either terrapin or warmoth ? how long did it take to arrive? I'll just add what it usually takes for something to get here from the us and add it on to turnaround time.

[TheLivingDead]

John @ Terrapin is a little behind right now. Understandably so, he's been battling cancer but thankfully he's in remission. He does superb work though and is an absolute joy to work with.

[Funkfingers]

It might help if you specified whether mean a regular T guard, routed for P90s in the neck and centre positions OR something more like a Seventies Fender Tele Deluxe guard with P90 cut-outs where the Wide Range humbuckers would normally go?

A partially finish Tele Deluxe guard would allow you to position the pickups and controls anywhere you desire.

In the case of the Squier Vintage Telecaster Custom II model, the guard is TDL style only with P90 holes.

[jake_xms3_punk]

It might help if you specified whether mean a regular T guard, routed for P90s in the neck and centre positions OR something more like a Seventies Fender Tele Deluxe guard with P90 cut-outs where the Wide Range humbuckers would normally go?

A partially finish Tele Deluxe guard would allow you to position the pickups and controls anywhere you desire.

In the case of the Squier Vintage Telecaster Custom II model, the guard is TDL style only with P90 holes.

just a standard tele. I'm making a 3 p90 tele, two in the pickguard.

[Funkfingers]

Any particular colour plastic? How will the P90s be mounted? Wood screws between the polepieces or screw lugs at each end of the baseplate?

[jake_xms3_punk]

I'm after B/W/B, soapbars mounted to the wood. I'm planning on using one of these so I'll probably have to widen the bridge cut out on the scratch plate.