Results 1 to 5 of 5

Thread: help with pc recordin

  1. #1
    Toneologist shreder75's Avatar
    Join Date
    Mar 2004
    Location
    New Jersey
    Age
    38
    Posts
    906
    Likes (Given)
    0
    Likes (Received)
    0

    Default help with pc recordin

    I'm trying to just slap an SM57 right to my sound card and record that way..I don't have any fancy software or anything..but just wanna mic my cab and friggin' record something...

    I can't hear anything comming through the mic...am I able to record this way? help~
    Splawn QR
    Splawn 4x12 w/greenbacks
    Splawn 2x12 w/ CL80s
    George Lynch Skulls n' Snakes Sig ESP w/JB trembucker

    My Cover Band
    My Gear Pix
    My SPLAWN Clips
    My SPLAWN Vids/Homepage

  2. #2
    Tone Member inter's Avatar
    Join Date
    May 2004
    Location
    Sydney, Australia
    Age
    38
    Posts
    239
    Likes (Given)
    0
    Likes (Received)
    0

    Default Re: help with pc recordin

    Try this link out for your software needs http://www.kreatives.org/kristal/index.php. There's better out there but Kristal is free and simple to use.

    I'd check your "Sound and Audio Devices" in your PC's control panel. You can test and setup your mic levels in there or maybe in your soundcard's software.

    Just a quick idea, I mic up my amp to run through my PC speakers when I'm just jamming at home. I've got these cool Altec Lansing MX 5021 (90 watts RMS) speakers. It sounds huge and better than some crappy PA's I've heard.

  3. #3
    Toneologist shreder75's Avatar
    Join Date
    Mar 2004
    Location
    New Jersey
    Age
    38
    Posts
    906
    Likes (Given)
    0
    Likes (Received)
    0

    Default Re: help with pc recordin

    from what I've been told, I need a mic pre amp to get the shure to work through my sound card...either which way, it wouldn't friggin' work...so I was reduced to using a ****ty pc voice mic..ugh..lol
    Splawn QR
    Splawn 4x12 w/greenbacks
    Splawn 2x12 w/ CL80s
    George Lynch Skulls n' Snakes Sig ESP w/JB trembucker

    My Cover Band
    My Gear Pix
    My SPLAWN Clips
    My SPLAWN Vids/Homepage

  4. #4
    Mojo's Minions Brow's Avatar
    Join Date
    Mar 2004
    Location
    Nottingham, UK
    Posts
    3,247
    Likes (Given)
    0
    Likes (Received)
    27

    Default Re: help with pc recordin

    Quote Originally Posted by shreder75
    from what I've been told, I need a mic pre amp to get the shure to work through my sound card...either which way, it wouldn't friggin' work...so I was reduced to using a ****ty pc voice mic..ugh..lol
    I've plugged an SM57 directly into my Sound Card before and it worked fine.

    I'll admit, a Mic pre-amp would improve matters alot, but it worked out ok for me that way

    Craig
    Gibson, PRS, Fender, Patrick Eggle, BC Rich, Gordon Smith, Jackson, Ibanez and Home-built Guitars.

    Splawn Quick Rod, Soldano SLO Clone, Marshall JCM800, Matamp + old Carlsbro amps, Zilla and Award Session speaker cabs.

    Mainly HomeBrew Electronics and G2D FX, plus a few other.

    My local shop and Seymour Duncan Dealer: http://www.crazytrainmusic.co.uk

  5. #5
    Toneologist shreder75's Avatar
    Join Date
    Mar 2004
    Location
    New Jersey
    Age
    38
    Posts
    906
    Likes (Given)
    0
    Likes (Received)
    0

    Default Re: help with pc recordin

    weird....maybe it's one of the adaptors that aren't working?? I have no idea....
    Splawn QR
    Splawn 4x12 w/greenbacks
    Splawn 2x12 w/ CL80s
    George Lynch Skulls n' Snakes Sig ESP w/JB trembucker

    My Cover Band
    My Gear Pix
    My SPLAWN Clips
    My SPLAWN Vids/Homepage

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •