Does it say the Pickup model anywhere on the pickup?

[Duke of Metal]

hey guys,
Do the seymour duncan pickups say what pickup each is?? I mean, is there a carved name, sticker or somthing that tells a person what model Duncan pickups is??


thanks,
Duke

[korinastratkyle]

on the bottom side of humbuckers I know it'll have the model name on a sticker, Id assume the same for single coils.

[Duke of Metal]

on the bottom side of humbuckers I know it'll have the model name on a sticker, Id assume the same for single coils.

Cool Thanks..

also.. can a pickup be identified if that sticker is removed??


thanks,
Duke

[John Wymore]

You can check coil resistance with an ohmeter and get a good idea. Just compare your reading with the specs given on the Duncan website. You can also tell necks from bridges on logo pickups by the way the logo faces.

[Metalman_666]

with a sticker on the bottom, the name of the pup should be there (sh-xx) but without you could test the resistance and output.

[Duke of Metal]

hey guys,
Ok.. i got the pickup. Its suppose to be a Duncan Custom SH-5, but there is no sticker on it.

Where do I have to meassure to find the resistance and output??


thanks,
Duke

[Duke of Metal]

ok.. I think I was able to meassure the resistance. I dont have a digital Meter here, so i used the needle one I have in the little kit I have.

I put the dial on OHMS and connected each of the black and green wires to each of the red and black poles and I believe the reading was 14k.

Thats close to the Duncan Custom. no??

and finally.. how do I meassure the output??


thanks,
Duke