Results 1 to 3 of 3

Thread: Needed: A four-pole double-throw toggle switch...

  1. #1
    Mojo's Minions Sludgenutz's Avatar
    Join Date
    Oct 2005
    Location
    The Mojave Desert
    Age
    49
    Posts
    6,345
    Likes (Given)
    0
    Likes (Received)
    2

    Default Needed: A four-pole double-throw toggle switch...

    I need a source for a four pole, double throw, on-on switch! It does not have to be a mini-switch, as the jack-size hole for the switch is already in the guitar body.** A mail order electronics retailer, or super-retailer is just as good to me. An all black switch is preffered, if possible.

    Always appreciated, I thank you guys in advance.



    **The purpose of this switch is one part of a two part guitar mod: Modding the Epi Iommi SG body to relocate the output jack to the botton edge, and fill the old output jack hole with a toggle switch that will allow parallel (non-humbucking) output from the Iommi pickups. If such a mod would make the guitar sound P-90-ish...I would be totally jazzed!

  2. #2
    Senior Member Leather Rebel's Avatar
    Join Date
    Mar 2004
    Location
    Berea, KY
    Age
    45
    Posts
    96
    Likes (Given)
    0
    Likes (Received)
    0

    Default Re: Needed: A four-pole double-throw toggle switch...

    I think they sell those at stewmac.com, but you can probably find them on Ebay just as easy without the minimum order and cheaper shipping.
    My Gear:
    Kramer USA Baretta II;Ibanez RG550 (MIJ)
    Laney Pro Tube Lead AOR 50watt 1x12" Combo
    Boss GT-3;ProCo Rat2;DOD 250 Overdrive/Preamp;DOD 201 Phaser;DOD FX-90 Delay

    Pickups Used:
    TB-12 Screamin' Demon;TB-4 JB;SH-10 Full Shred;SH-5 Custom;TB-1 '59;TB-6 Distortion

  3. #3
    Ultimate Tone Slacker Fresh_Start's Avatar
    Join Date
    Mar 2004
    Location
    Richmond
    Posts
    2,115
    Likes (Given)
    0
    Likes (Received)
    0

    Default Re: Needed: A four-pole double-throw toggle switch...

    Mouser http://www.mouser.com/catalog/624/1175.pdf -

    Do a search for electromechanical/switches/toggle switches/"4PDT" and you'll see the choices (aren't many in stock)

    Chip

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •