Our newest delay member.
Used everything from shortest to longest settings.
Fiddled with the tone, and switched in the phaser in loop from time to time.
If you pull the outputjack half out you only get the wet signal, meaning that you can use a small extra amp as wet only, no clean signal and it cuts out when the effects is gone, so when the delay is disengaged there is no clean signal, it is just an option, use a stereojack out into two monojacks if you want to use the feature.
When you disengage the delay it leaves a trail.
It goes to about 1.5 sec of delay, it can go to over 2 secs, but the signal is not all that pretty out there
Taptempo or manual timesetting, switchable.
Used my strat and my Marshall DRP-1 for the recording.