Hex screws q's
Hey!
I have a Demon here that I want to take the hex screws out of and try in my Jazz. Are the screws the same width -- i.e. will fit in a standard pickup screw hole? I assume that I'll also need to have an allen wrench to get them out. Anything else I should know so I don't screw up two perfectly good pickups?
Gibson LP Melody Maker -- stock, Epiphone Dot -- Jazz neck and '59 bridge, Fender Telecaster Blackout Deluxe -- stock, 90's MIM Standard Strat with Duncan Texas Hot Custom in the bridge.
Re: Hex screws q's
They will work perfectly...
GMP Guitars RULE!
Re: Hex screws q's
Thanks Pete!
Last edited by gripweed; 05-06-2006 at 07:02 AM.
Gibson LP Melody Maker -- stock, Epiphone Dot -- Jazz neck and '59 bridge, Fender Telecaster Blackout Deluxe -- stock, 90's MIM Standard Strat with Duncan Texas Hot Custom in the bridge.
Re: Hex screws q's
Same size , tell us how the Jazz is with them .
Re: Hex screws q's
I've got the right size of allen wrench, so it should be pretty soon...Originally Posted by fab.regnaut
Last edited by gripweed; 05-06-2006 at 01:49 PM.
Gibson LP Melody Maker -- stock, Epiphone Dot -- Jazz neck and '59 bridge, Fender Telecaster Blackout Deluxe -- stock, 90's MIM Standard Strat with Duncan Texas Hot Custom in the bridge.
Re: Hex screws q's
You will probally have a Full Shed jazz hybrid most likely! It will have a row of slugs like the jazz and a row of hex's like the FS. I dont doubt they are the same coils!
Re: Hex screws q's
My initial reaction is that it is a little more percussive and brighter (which I like in a neck humbucker.) I have an a4 magnet that I might try in it, we'll see.
Gibson LP Melody Maker -- stock, Epiphone Dot -- Jazz neck and '59 bridge, Fender Telecaster Blackout Deluxe -- stock, 90's MIM Standard Strat with Duncan Texas Hot Custom in the bridge.
Posting Permissions
Reply With Quote