Need Help wiring CAPS
What is the best way to wire the CAPS - on the HOT side of pots or to ground? Seymour Duncan schematic shows it wired to the HOT side of the volume knobs but a schematic on stewmac.com showed the CAPS wired on the ground Pin ... if anyone can shed a little light on this that would be great!
- Fender Standard-Amer Tele: Vintage Stack (neck) - Little '59 (bridge)
- 1956 Kay Archtop - Phat Cats in Neck & Bridge!
- Alvarez-Yairi Acoustic DY84C
- Traynor YCV20-WR
I can't imagin there is a difference at all because the resistor (the pot) and the cap are in series and it doesn't matter which come first...
or do you mean how the hole tone circuit is connected at the volume pot?
RG 550 [JB | SingleSizedHole(TM) | V1 (to be replaced)]
TS 7 (modded)
Hot Rod 50+ XL
Framus Dragon 4x12
V-AMP II for practice
Posting Permissions
Reply With Quote