lug 0 on a switch?

[Pissant]

i am lookin at a 3-way switch diagram and it talks about a "lug 0" but in the pic there is no 0 only 1-3 ...where is number 0
http://www.stewmac.com/wiring101/dia...3and5_way.html
thanks

[HolyDirt]

i am lookin at a 3-way switch diagram and it talks about a "lug 0" but in the pic there is no 0 only 1-3 ...where is number 0
http://www.stewmac.com/wiring101/dia...3and5_way.html
thanks

there are 4 terminals on each side of the switch, the "0" lug is the common lug

[Pissant]

where is it located?

[HolyDirt]

where is it located?

it varies from different types of switches.... for fender type switches it's generally the top right and bottom left lug (if you look at it so the switch runs vertically, doesnt matter if you flip it over, the common's in the same place)

[Pissant]

its a mini toggle on/on/on switch from allparts

[HolyDirt]

its a mini toggle on/on/on switch from allparts

OHHHHHH you should have told me this at the beginning, on those tyles of switches, there is no "0" lug, do you want a normal 3 way pickup selector?
a.k.a. neck, neck+bridge, bridge?

edit: well, they DO have a "0" lug, or should i say lugs, but they're not ususally used in the same sense as a pickup switch, but in this case they are... the 2 "0" lugs would be the middle terminals on each pole.

[Pissant]

yeah im wiring it as a pickup selector
i just cant find schematics that will tell me how to do it exactly..so if u could explain more of what i must do id appreciate it...sry for the trouble

[HolyDirt]

I drew up a little schematic because i'm horrible at explaining things like this with words, here:


that should do it for ya!

[HolyDirt]

oh ya and, no trouble, glad to help good luck

[Pissant]

omg thanks so much that helps alot

[That90'sGuy]

I drew up a little schematic because i'm horrible at explaining things like this with words, here:


that should do it for ya!

Nice diagram, even I understood it

[HolyDirt]

Nice diagram, even I understood it

bad schematics suck