Our country-fried Pearly Gates humbucker pickups transform any Les Paul style guitar into a classic rock outlaw. The Pearly Gates neck captures all the mojo of the original neck pickup from Billy Gibbons’ 1959 Les Paul. It is a P.A.F. with a unique tonal variation that provides more midrange than typical humbuckers from that time. The result is a neck pickup that cuts through with stronger tailored mids, but still has the open and airy treble attack of the alnico 2 bar magnet. Combined with a warm, spongy low-end, this pickup is great for both rhythm and lead playing.

Seymour discovered Billy’s bridge pickup had slightly more output than most P.A.F.s, which helped to give it the extra drive that make this pickup so special. The alnico 2 bar magnet keeps the high end sounding airy but focused, and the midrange emphasis gives it a unique Texas sizzle. It really has a growl all its own and will help to bring any humbucker-equipped instrument to life.

Hand built in our Santa Barbara, CA factory, the Pearly Gates vintage output humbucker pickups use an alnico 2 bar magnet, nickel silver bottom plate, 4-conductor lead wire for multiple wiring options, and are vacuum wax potted for squeal-free performance. The Pearly Gates bridge is available in both standard humbucker and Trembucker spacing. As with all our P.A.F. style humbuckers, every Pearly Gates is wound on Seymour’s original Leesona winding machine from the early Gibson factory in Kalamazoo, Michigan, for that unmistakable vintage mojo.

Philip Sayce is a true master of his craft, wowing audiences around the globe with his blend of blues, rock, and meticulously crafted tone. Since the late ’90s, one guitar has been the driving force behind the sound of his solo career and his time performing with artists including Jeff Healey, Melissa Etheridge, and Uncle Kracker. The “Mother” Strat® is a modified 1963 Fender Stratocaster®, an incredible workhorse whose wear and tear match the intensity of Sayce’s electrifying performances.

Philip has been known to bust out an impromptu slide guitar solo with a beer bottle. One fateful night, the original 1963 pickups in Philip’s guitar got doused with beer and eventually bit the dust after succumbing to corrosion and shorting out. However, when he swapped them out with some special pickups sourced from a 1958 Strat®, “Mother” took on a whole new life and legendary sound. These slightly underwound late-’50s pickups brought out a clear, full-bodied sound that has been the hallmark of Philip’s guitar tone ever since.

By taking great care to reverse-engineer the pickups from “Mother,” the Seymour Duncan Custom Shop was able to recreate the singing, punchy Strat sound that emanates from this magical guitar. Chimey, bell-like cleans easily morph into the sizzle that can be achieved by adding an overdrive or one of Philip’s favorite fuzzes. The Seymour Duncan “Mother” Stratocaster® Pickup Set gives you period-correct Alnico 5 magnets with just the right wind to match the feel and responsiveness of Philip’s original guitar.

The first 500 sets of the Philip Sayce “Mother” Stratocaster® Pickups are specially aged in the Custom Shop to match the look of the originals. They include a certificate of authenticity signed by Philip and Seymour W. Duncan inside the limited-edition packaging. All sets are pad-printed with Philip’s signature on the flatwork.

For those wanting great vintage Strat® tone and Philip’s powerful sound in their own Strat®-style guitar, look no further than the Philip Sayce “Mother” Signature Stratocaster® Pickup Set.

Magnets:
Neck – Alnico 5
Middle – Alnico 5
Bridge – Alnico 5

DC Resistance:
Neck – 5.72k
Middle – 5.78k
Bridge – 5.86k

Cable Type:
Neck – Waxed Cotton
Middle – Waxed Cotton
Bridge – Waxed Cotton

Strat ® and Stratocaster ® are registered trademarks of Fender Musical Instruments Corporation

For those who crave relentless power in their tone, Black Winter Rails brings a ferocious new edge to our legendary Black Winter pickups. Built for the heaviest, most extreme metal genres, this evolution combines the crushing aggression of the original Black Winter with the modern advantages of rail design. The result is a passive pickup that delivers searing high-gain tones with even greater string-to-string balance, tightness, and sustain. Whether you’re shredding through fluid leads, executing thunderous palm mutes, or pushing the limits of drop tunings, the Black Winter Rails offers the clarity and control you need to dominate the mix.

The addition of rails to our Black Winter’s brutal triple-ceramic magnet foundation takes the original’s high-output intensity to a whole new level of precision and performance. By evenly distributing the magnetic field across all strings, the rail design ensures unparalleled balance, even under the heaviest distortion. This tightens up the low end for focused power, while extending sustain for screaming leads that demand attention. Whether you’re chugging through drop-tuned brutality or layering intricate chord progressions, the Black Winter Rails keeps every note defined, giving you the responsiveness demanded by modern metal players.

Black Winter Rails are available for both 6 and 7-string guitars. No matter if you’re executing crushing riffs or unleashing scorching solos, these pickups are ready to transform your tone. Handcrafted in Santa Barbara, CA, the Black Winter Rails deliver unmatched clarity, sustain, and power for the most extreme styles. Don’t just play: dominate. Upgrade today and experience the full potential of Black Winter Rails.

Covers designed to fit our Jazzmaster pickups. 2 covers per set.

Note: covers do not fit our Quarter Pound™ Jazzmaster pickups.

The Jazzmaster®’s mystique is undeniable, with its unique offset body and punchy, tight tones loved by indie, rock and surf players alike. Its iconic clean chime and gritty, growling overdrive are perfect for players exploring rich, layered sounds. Yet, traditional Jazzmaster® pickups can be plagued by hum, pulling you out of that sonic sweet spot with unwanted noise.

Our Hot Jazzmaster® Silencer pickups fix that issue and add an extra edge. Designed by Seymour Duncan’s VP of Engineering Kevin Beller, these noiseless Jazzmaster® pickups employ a patent-pending triple-coil design, with two coils dedicated to hum-canceling and one inner coil that dials in that unmistakable Jazzmaster® vibe—but punchier. The visible row of Alnico 5 pole pieces preserves the classic Jazzmaster® look, while a higher output unleashes stronger, more powerful tones without sacrificing clarity.

The Hot Jazzmaster® Silencer neck pickup has a crisp, full-bodied tone, adding extra warmth in the low end, while the bridge pickup brings sharp definition and sustain for solos that cut through any mix. Designed as a drop-in replacement for any Jazzmaster®-sized pickups, this noiseless set lets you dive into gritty surf riffs, glimmering melodies, grungy fuzzed-out rock, reverb-drenched shoegaze, and beyond. With boosted output and zero hum, it’s everything you love about the Jazzmaster®, amped up.

Interested in more color options? Check out our Jazzmaster Covers.

Jazzmaster® is a registered trademark of Fender Musical Instruments Corporation.

Since its introduction in 1958, the Fender Jazzmaster® has enjoyed cult-classic status among purveyors of surf rock, indie, alternative, shoegaze, and beyond. Known for its bright, punchy cleans and warm, mellow overdriven growl, it’s perfect for creating rich soundscapes across a wide array of genres.

However, traditional Jazzmaster® pickups are plagued by unwanted noise, and that unruly hum can distract from your carefully crafted tone. So, we set out to create vintage-voiced noiseless Jazzmaster® pickups that do not sacrifice clarity and high-end.

The result is our Vintage Jazzmaster® Silencer pickups, noiseless Jazzmaster® pickups that don’t compromise on tone. Designed and crafted by Seymour Duncan’s VP of Engineering Kevin Beller, these Jazzmaster® pickups employ a patent-pending triple-coil system. With two outer coils canceling hum while an inner coil captures the unmistakable Jazzmaster® sound, they offer pure, authentic vintage tone with plenty of punch and warmth, but with absolutely no hum.

Plus, the visible Alnico 5 pole pieces maintain the classic Jazzmaster® look, so you get hum-free sound with an unaltered, vintage feel.

Enjoy the classic offset sound with a warm, punchy Jazzmaster® neck tone and a bright and tight Jazzmaster® bridge sound with plenty of snap. Our Vintage Jazzmaster® Silencer pickups are a drop-in replacement for any Jazzmaster®-sized pickups. Perfect for surf-inspired riffs, shimmering indie textures, modern pedal-driven explorations, and more, the Seymour Duncan Vintage Jazzmaster® Silencer pickups maintain bold presence without interference—just pure sonic clarity.

Interested in more color options? Check out our Jazzmaster Covers.

Jazzmaster® is a registered trademark of Fender Musical Instruments Corporation

This one-button footswitch from Seymour Duncan features a 5 meter (16.4 ft) long cable and Male TS ¼” plug for activating the overdrive (OD) on our PowerStage™ 700 Bass. Keep your tone pristine or engage the overdrive with the help of this robust Seymour Duncan footswitch.

• 1-button footswitch with long cable and a male TS ¼” plug
• Compatible with the PowerStage 700 Bass
• Durable build

Complete your stage setup with Rack mount ears for the PowerStage™ 700 Bass*. This includes two rack mount ears and the mounting hardware pack.

These rack mount ears are suitable for the PowerStage 700 Bass amp only. Rack mount ears for our original PowerStage 700 (for guitar) can be found here.

Our PowerStage™ 700 Bass Deluxe Amp Bag perfectly fits your amplifier with essential protection features: robust construction, a shoulder strap for transport, accessory pocket for cables, and heavy-duty bottom pads – everything a bassist needs to safeguard their tone foundation.

• Robust Exterior Construction in Dark Grey
• Soft Scratch-Proof Diamond Stitched Black Interiors
• Heavy-Duty Industrial Padding
• Ultra Rigid Protection on the sides
• Large Accessory Pocket
• Soft Grip Black Contoured Carry Handle
• Detachable Adjustable Shoulder Strap with Soft Pad
• Abrasion Resistant Bottom Protection Pads
• Sturdy Heavy Duty Black Zippers & Black Pullers
• Heavy Duty Metal Fittings
• 36x 24 x 09 cm

PowerStage 700 Bass is the ultimate solution for bass players seeking power, portability, and pristine sound quality. Designed by Seymour Duncan’s legendary engineer Kevin Beller, a lifelong bass player, this 700-watt bass head delivers unparalleled clarity and performance in a lightweight, rugged package. Whether plugging in on stage or in the studio, PowerStage 700 Bass provides tight low end and rich harmonics, with a footswitchable built-in overdrive for an extra layer of sonic versatility.

A robust, bass-optimized EQ (treble, low mid, high mid, bass and presence) tailors your sound to any room. Need to switch between active and passive basses? You’re covered – PowerStage 700 Bass includes a convenient -10db pad control. Multiple output options (¼”, Speakon, XLR DI, and headphone) work for any setup, whether powering cabinets, going direct to a PA, or recording straight into your audio interface.

PowerStage 700 Bass is compact and durable for easy transport yet powerful enough to fill any venue. This world-class bass head can also serve as the ideal clean power platform to amplify your preamp or modeler. Streamline your rig without compromising your sound and focus on what truly matters—your music.

• 700 Watts of Power at 4 ohms
• Preamp voiced for a wide range of vintage & modern bass sounds
• Built-in Overdrive that can go from a light vintage saturation to full throttle bone-grinding distortion (with optional footswitchable control)
• Effects loop allows for post-preamp processing and easy integration with modelers and preamp pedals
• 4 band EQ, Sweepable mid controls, and presence button offer dynamic tone shaping possibilities
• Aux input
• Super lightweight and durable chassis for easy transport with our optional gig bag or rack ears.