Likes Likes:  0
Results 1 to 2 of 2

Thread: HSH with push pull to chose middle PU or N/B humbuckers

  1. #1
    Junior Member
    Join Date
    Aug 2013
    Posts
    1

    Default HSH with push pull to chose middle PU or N/B humbuckers

    Hi Folks,
    Please advise wiring for my Godin Freeway HSH with SD pickups. (AlnicoPro II neck, Hot rails middle and JB bridge)
    My plan is:
    In middle position of the 5 way selector - the push pull 250k tone control - pulled position will engage both N + B (like the Les Paul) and back to MIDDLE only when pushed down.

    Many Thanks!

  2. #2
    Junior Member
    Join Date
    Sep 2017
    Posts
    19

    Default Re: HSH with push pull to chose middle PU or N/B humbuckers

    Not sure if that is possible but schaller make a 5 way which can do B-N in position 3 and possibly custom do one that does all 3 in position 3. IF the latter is the case you MIGHT be able to run a dpdt muting the B-N in the up toggle and muting the middle in the down toggle, but coil splitting will make that more difficult. There is also the 4dpt S1 switch but i probably wouldn't go there...

    Aside from the traditional 7 way wiring that everybody will probably reccomend you do (including me) you could try the 6 way blade switch freeway does and do:
    B
    BN
    N
    bm
    m
    mn
    It's a 3+3 rather than a six in line

    HTH

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •