Results 1 to 3 of 3

Thread: Foot switch will not work - how to diagnose the problem

  1. #1
    Member
    Join Date
    Feb 2017
    Posts
    45

    Default Foot switch will not work - how to diagnose the problem

    I have a marshall with two channels. The foot switch goes between clean/OD on one button and the second button switches between two MVs. The button for switching between clean/OD does not light up and the amp does not switch via foot switch. However, the MV switch does light up, but only works with the OD channel (clean is not designed with a second MV). Is the switch shot or is there something internally wrong with the amp? Also, the panel does not have a manual switch to go between channels, its only operable by the foot switch to go between clean/OD

  2. #2
    Just A Minion ErikH's Avatar
    Join Date
    May 2005
    Location
    The Lonestar State
    Age
    47
    Posts
    20,006

    Default Re: Foot switch will not work - how to diagnose the problem

    What amp is this?

  3. #3
    Ultimate Tone Member InbredJunk's Avatar
    Join Date
    Nov 2013
    Location
    Missouri
    Posts
    410

    Default Re: Foot switch will not work - how to diagnose the problem

    First things I would try is another cable, and another footswitch. Dont try both at the same time. Try a new cable with your footswitch. Then try a new footswitch with your old cable. Do you have a friend with another footswitch you can borrow?

    Sent from my SAMSUNG-SM-G891A using Tapatalk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •